Your All‑In‑One Online Tool Hub
Your All‑In‑One Online Tool Hub
Test any hostname, domain, or IP address with real ICMP packets. Check latency, packet loss, TTL, and host reachability instantly — no command line or installation needed.
Max 10 pings per scan, 5 scans per minute. For bulk scanning, use a local network diagnostic tool.
The host did not respond to ICMP echo requests. This does not necessarily mean the server is offline — many firewalls and cloud providers (including AWS, Google Cloud, and Cloudflare) block ICMP ping while still serving web traffic normally. Try checking the host with the Port Checker to verify HTTP/HTTPS connectivity.
| Seq | RTT (ms) | TTL | Status |
|---|
An online ping tool sends ICMP echo request packets from a server to a target hostname or IP address and measures the round-trip time (RTT) for each packet. Unlike running ping from your own computer, an online ping tool tests reachability from an external server — so you can verify whether a host is accessible from the public internet, independent of your local network or ISP.
Packet loss occurs when one or more ICMP echo request packets fail to receive a reply. It is expressed as a percentage — 0% is ideal. Even 1–2% packet loss can cause noticeable issues in real-time applications like video calls or online gaming. High packet loss (10% or more) typically indicates network congestion, routing problems, or an unstable connection between the test server and your target.
TTL stands for Time To Live. Each ICMP packet starts with a TTL value that decrements by 1 at every router hop it passes through. The TTL value in the ping reply reflects how many hops remain when the packet reached its destination. Because different operating systems use different default TTL values — Linux/Unix starts at 64, Windows at 128, and network devices at 255 — the received TTL gives a rough indication of the target host's operating system.
Many web servers and firewalls block ICMP echo requests as a security measure while still serving HTTP/HTTPS traffic normally. If the ping shows unreachable but you can browse the site, ICMP is most likely blocked by a firewall or the host's network configuration — the server itself is online. This is especially common with cloud providers like AWS, Google Cloud, and Cloudflare-protected sites.
Response time quality depends on the distance between the test server and the target. As a general guide: under 50ms is Excellent and ideal for all uses including gaming and video calls; 50–100ms is Good and suitable for most activities; 100–200ms is Average and may introduce slight lag in real-time applications; over 200ms is Poor and likely to cause noticeable delays. Keep in mind that pinging a server on another continent will naturally have higher latency than one in the same region.
Disclaimer: QuickITTools.com and EnterPlanet LLC strive to make our tools as accurate as possible. Ping results are generated in real time using ICMP echo requests sent from our server and reflect network conditions at the moment of the test. Results may vary between tests due to network congestion, routing changes, or firewall policies on the target host. This tool is intended for legitimate network diagnostics only. Do not use it to test hosts you do not own or have permission to test.